diff --git a/docs/chapter_backtracking/n_queens_problem.md b/docs/chapter_backtracking/n_queens_problem.md
index ab303b8b..ed7c8e53 100644
--- a/docs/chapter_backtracking/n_queens_problem.md
+++ b/docs/chapter_backtracking/n_queens_problem.md
@@ -44,6 +44,6 @@
[file]{n_queens}-[class]{}-[func]{n_queens}
```
-逐行放置 $n$ 次，考虑列约束，则从第一行到最后一行分别有 $n$、$n-1$、$\dots$、$2$、$1$ 个选择，**因此时间复杂度为 $O(n!)$** 。实际上，根据对角线约束的剪枝也能够大幅缩小搜索空间，因而搜索效率往往优于以上时间复杂度。
+逐行放置 $n$ 次，考虑列约束，则从第一行到最后一行分别有 $n$、$n-1$、$\dots$、$2$、$1$ 个选择，使用 $O(n!)$ 时间；当保存解时，需要复制矩阵 `state` 并添加进 `res` ，复制操作使用 $O(n^2)$ 时间；因此总体时间复杂度为 $O(n! \cdot n^2)$ 。实际上，根据对角线约束的剪枝也能够大幅缩小搜索空间，因而搜索效率往往优于以上时间复杂度。
数组 `state` 使用 $O(n^2)$ 空间，数组 `cols`、`diags1` 和 `diags2` 皆使用 $O(n)$ 空间。最大递归深度为 $n$ ，使用 $O(n)$ 栈帧空间。因此，**空间复杂度为 $O(n^2)$** 。
diff --git a/docs/chapter_dynamic_programming/dp_solution_pipeline.assets/min_path_sum_solution_step3.png b/docs/chapter_dynamic_programming/dp_solution_pipeline.assets/min_path_sum_solution_initial_state.png
similarity index 100%
rename from docs/chapter_dynamic_programming/dp_solution_pipeline.assets/min_path_sum_solution_step3.png
rename to docs/chapter_dynamic_programming/dp_solution_pipeline.assets/min_path_sum_solution_initial_state.png
diff --git a/docs/chapter_dynamic_programming/dp_solution_pipeline.assets/min_path_sum_solution_step1.png b/docs/chapter_dynamic_programming/dp_solution_pipeline.assets/min_path_sum_solution_state_definition.png
similarity index 100%
rename from docs/chapter_dynamic_programming/dp_solution_pipeline.assets/min_path_sum_solution_step1.png
rename to docs/chapter_dynamic_programming/dp_solution_pipeline.assets/min_path_sum_solution_state_definition.png
diff --git a/docs/chapter_dynamic_programming/dp_solution_pipeline.assets/min_path_sum_solution_step2.png b/docs/chapter_dynamic_programming/dp_solution_pipeline.assets/min_path_sum_solution_state_transition.png
similarity index 100%
rename from docs/chapter_dynamic_programming/dp_solution_pipeline.assets/min_path_sum_solution_step2.png
rename to docs/chapter_dynamic_programming/dp_solution_pipeline.assets/min_path_sum_solution_state_transition.png
diff --git a/docs/chapter_dynamic_programming/dp_solution_pipeline.md b/docs/chapter_dynamic_programming/dp_solution_pipeline.md
index aff5d7da..1d9c0b92 100644
--- a/docs/chapter_dynamic_programming/dp_solution_pipeline.md
+++ b/docs/chapter_dynamic_programming/dp_solution_pipeline.md
@@ -47,7 +47,7 @@
至此，我们就得到了下图所示的二维 $dp$ 矩阵，其尺寸与输入网格 $grid$ 相同。
-
+
!!! note
@@ -65,7 +65,7 @@ $$
dp[i, j] = \min(dp[i-1, j], dp[i, j-1]) + grid[i, j]
$$
-
+
!!! note
@@ -79,7 +79,7 @@ $$
如下图所示，由于每个格子是由其左方格子和上方格子转移而来，因此我们使用循环来遍历矩阵，外循环遍历各行，内循环遍历各列。
-
+
!!! note
diff --git a/docs/chapter_graph/graph_operations.assets/adjacency_list_initialization.png b/docs/chapter_graph/graph_operations.assets/adjacency_list_step1_initialization.png
similarity index 100%
rename from docs/chapter_graph/graph_operations.assets/adjacency_list_initialization.png
rename to docs/chapter_graph/graph_operations.assets/adjacency_list_step1_initialization.png
diff --git a/docs/chapter_graph/graph_operations.assets/adjacency_list_add_edge.png b/docs/chapter_graph/graph_operations.assets/adjacency_list_step2_add_edge.png
similarity index 100%
rename from docs/chapter_graph/graph_operations.assets/adjacency_list_add_edge.png
rename to docs/chapter_graph/graph_operations.assets/adjacency_list_step2_add_edge.png
diff --git a/docs/chapter_graph/graph_operations.assets/adjacency_list_remove_edge.png b/docs/chapter_graph/graph_operations.assets/adjacency_list_step3_remove_edge.png
similarity index 100%
rename from docs/chapter_graph/graph_operations.assets/adjacency_list_remove_edge.png
rename to docs/chapter_graph/graph_operations.assets/adjacency_list_step3_remove_edge.png
diff --git a/docs/chapter_graph/graph_operations.assets/adjacency_list_add_vertex.png b/docs/chapter_graph/graph_operations.assets/adjacency_list_step4_add_vertex.png
similarity index 100%
rename from docs/chapter_graph/graph_operations.assets/adjacency_list_add_vertex.png
rename to docs/chapter_graph/graph_operations.assets/adjacency_list_step4_add_vertex.png
diff --git a/docs/chapter_graph/graph_operations.assets/adjacency_list_remove_vertex.png b/docs/chapter_graph/graph_operations.assets/adjacency_list_step5_remove_vertex.png
similarity index 100%
rename from docs/chapter_graph/graph_operations.assets/adjacency_list_remove_vertex.png
rename to docs/chapter_graph/graph_operations.assets/adjacency_list_step5_remove_vertex.png
diff --git a/docs/chapter_graph/graph_operations.assets/adjacency_matrix_initialization.png b/docs/chapter_graph/graph_operations.assets/adjacency_matrix_step1_initialization.png
similarity index 100%
rename from docs/chapter_graph/graph_operations.assets/adjacency_matrix_initialization.png
rename to docs/chapter_graph/graph_operations.assets/adjacency_matrix_step1_initialization.png
diff --git a/docs/chapter_graph/graph_operations.assets/adjacency_matrix_add_edge.png b/docs/chapter_graph/graph_operations.assets/adjacency_matrix_step2_add_edge.png
similarity index 100%
rename from docs/chapter_graph/graph_operations.assets/adjacency_matrix_add_edge.png
rename to docs/chapter_graph/graph_operations.assets/adjacency_matrix_step2_add_edge.png
diff --git a/docs/chapter_graph/graph_operations.assets/adjacency_matrix_remove_edge.png b/docs/chapter_graph/graph_operations.assets/adjacency_matrix_step3_remove_edge.png
similarity index 100%
rename from docs/chapter_graph/graph_operations.assets/adjacency_matrix_remove_edge.png
rename to docs/chapter_graph/graph_operations.assets/adjacency_matrix_step3_remove_edge.png
diff --git a/docs/chapter_graph/graph_operations.assets/adjacency_matrix_add_vertex.png b/docs/chapter_graph/graph_operations.assets/adjacency_matrix_step4_add_vertex.png
similarity index 100%
rename from docs/chapter_graph/graph_operations.assets/adjacency_matrix_add_vertex.png
rename to docs/chapter_graph/graph_operations.assets/adjacency_matrix_step4_add_vertex.png
diff --git a/docs/chapter_graph/graph_operations.assets/adjacency_matrix_remove_vertex.png b/docs/chapter_graph/graph_operations.assets/adjacency_matrix_step5_remove_vertex.png
similarity index 100%
rename from docs/chapter_graph/graph_operations.assets/adjacency_matrix_remove_vertex.png
rename to docs/chapter_graph/graph_operations.assets/adjacency_matrix_step5_remove_vertex.png
diff --git a/docs/chapter_graph/graph_operations.md b/docs/chapter_graph/graph_operations.md
index ae344b56..abab2a86 100644
--- a/docs/chapter_graph/graph_operations.md
+++ b/docs/chapter_graph/graph_operations.md
@@ -12,19 +12,19 @@
- **初始化**：传入 $n$ 个顶点，初始化长度为 $n$ 的顶点列表 `vertices` ，使用 $O(n)$ 时间；初始化 $n \times n$ 大小的邻接矩阵 `adjMat` ，使用 $O(n^2)$ 时间。
=== "初始化邻接矩阵"
- 
+ 
=== "添加边"
- 
+ 
=== "删除边"
- 
+ 
=== "添加顶点"
- 
+ 
=== "删除顶点"
- 
+ 
以下是基于邻接矩阵表示图的实现代码：
@@ -43,19 +43,19 @@
- **初始化**：在邻接表中创建 $n$ 个顶点和 $2m$ 条边，使用 $O(n + m)$ 时间。
=== "初始化邻接表"
- 
+ 
=== "添加边"
- 
+ 
=== "删除边"
- 
+ 
=== "添加顶点"
- 
+ 
=== "删除顶点"
- 
+ 
以下是邻接表的代码实现。对比上图，实际代码有以下不同。
diff --git a/docs/chapter_stack_and_queue/deque.assets/array_deque.png b/docs/chapter_stack_and_queue/deque.assets/array_deque_step1.png
similarity index 100%
rename from docs/chapter_stack_and_queue/deque.assets/array_deque.png
rename to docs/chapter_stack_and_queue/deque.assets/array_deque_step1.png
diff --git a/docs/chapter_stack_and_queue/deque.assets/array_deque_push_last.png b/docs/chapter_stack_and_queue/deque.assets/array_deque_step2_push_last.png
similarity index 100%
rename from docs/chapter_stack_and_queue/deque.assets/array_deque_push_last.png
rename to docs/chapter_stack_and_queue/deque.assets/array_deque_step2_push_last.png
diff --git a/docs/chapter_stack_and_queue/deque.assets/array_deque_push_first.png b/docs/chapter_stack_and_queue/deque.assets/array_deque_step3_push_first.png
similarity index 100%
rename from docs/chapter_stack_and_queue/deque.assets/array_deque_push_first.png
rename to docs/chapter_stack_and_queue/deque.assets/array_deque_step3_push_first.png
diff --git a/docs/chapter_stack_and_queue/deque.assets/array_deque_pop_last.png b/docs/chapter_stack_and_queue/deque.assets/array_deque_step4_pop_last.png
similarity index 100%
rename from docs/chapter_stack_and_queue/deque.assets/array_deque_pop_last.png
rename to docs/chapter_stack_and_queue/deque.assets/array_deque_step4_pop_last.png
diff --git a/docs/chapter_stack_and_queue/deque.assets/array_deque_pop_first.png b/docs/chapter_stack_and_queue/deque.assets/array_deque_step5_pop_first.png
similarity index 100%
rename from docs/chapter_stack_and_queue/deque.assets/array_deque_pop_first.png
rename to docs/chapter_stack_and_queue/deque.assets/array_deque_step5_pop_first.png
diff --git a/docs/chapter_stack_and_queue/deque.assets/linkedlist_deque.png b/docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_step1.png
similarity index 100%
rename from docs/chapter_stack_and_queue/deque.assets/linkedlist_deque.png
rename to docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_step1.png
diff --git a/docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_push_last.png b/docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_step2_push_last.png
similarity index 100%
rename from docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_push_last.png
rename to docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_step2_push_last.png
diff --git a/docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_push_first.png b/docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_step3_push_first.png
similarity index 100%
rename from docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_push_first.png
rename to docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_step3_push_first.png
diff --git a/docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_pop_last.png b/docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_step4_pop_last.png
similarity index 100%
rename from docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_pop_last.png
rename to docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_step4_pop_last.png
diff --git a/docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_pop_first.png b/docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_step5_pop_first.png
similarity index 100%
rename from docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_pop_first.png
rename to docs/chapter_stack_and_queue/deque.assets/linkedlist_deque_step5_pop_first.png
diff --git a/docs/chapter_stack_and_queue/deque.md b/docs/chapter_stack_and_queue/deque.md
index 37e72b3c..1568c287 100644
--- a/docs/chapter_stack_and_queue/deque.md
+++ b/docs/chapter_stack_and_queue/deque.md
@@ -347,19 +347,19 @@
如下图所示，我们将双向链表的头节点和尾节点视为双向队列的队首和队尾，同时实现在两端添加和删除节点的功能。
=== "LinkedListDeque"
- 
+ 
=== "push_last()"
- 
+ 
=== "push_first()"
- 
+ 
=== "pop_last()"
- 
+ 
=== "pop_first()"
- 
+ 
实现代码如下所示：
@@ -372,19 +372,19 @@
如下图所示，与基于数组实现队列类似，我们也可以使用环形数组来实现双向队列。
=== "ArrayDeque"
- 
+ 
=== "push_last()"
- 
+ 
=== "push_first()"
- 
+ 
=== "pop_last()"
- 
+ 
=== "pop_first()"
- 
+ 
在队列的实现基础上，仅需增加“队首入队”和“队尾出队”的方法：
diff --git a/docs/chapter_stack_and_queue/queue.assets/array_queue.png b/docs/chapter_stack_and_queue/queue.assets/array_queue_step1.png
similarity index 100%
rename from docs/chapter_stack_and_queue/queue.assets/array_queue.png
rename to docs/chapter_stack_and_queue/queue.assets/array_queue_step1.png
diff --git a/docs/chapter_stack_and_queue/queue.assets/array_queue_push.png b/docs/chapter_stack_and_queue/queue.assets/array_queue_step2_push.png
similarity index 100%
rename from docs/chapter_stack_and_queue/queue.assets/array_queue_push.png
rename to docs/chapter_stack_and_queue/queue.assets/array_queue_step2_push.png
diff --git a/docs/chapter_stack_and_queue/queue.assets/array_queue_pop.png b/docs/chapter_stack_and_queue/queue.assets/array_queue_step3_pop.png
similarity index 100%
rename from docs/chapter_stack_and_queue/queue.assets/array_queue_pop.png
rename to docs/chapter_stack_and_queue/queue.assets/array_queue_step3_pop.png
diff --git a/docs/chapter_stack_and_queue/queue.assets/linkedlist_queue.png b/docs/chapter_stack_and_queue/queue.assets/linkedlist_queue_step1.png
similarity index 100%
rename from docs/chapter_stack_and_queue/queue.assets/linkedlist_queue.png
rename to docs/chapter_stack_and_queue/queue.assets/linkedlist_queue_step1.png
diff --git a/docs/chapter_stack_and_queue/queue.assets/linkedlist_queue_push.png b/docs/chapter_stack_and_queue/queue.assets/linkedlist_queue_step2_push.png
similarity index 100%
rename from docs/chapter_stack_and_queue/queue.assets/linkedlist_queue_push.png
rename to docs/chapter_stack_and_queue/queue.assets/linkedlist_queue_step2_push.png
diff --git a/docs/chapter_stack_and_queue/queue.assets/linkedlist_queue_pop.png b/docs/chapter_stack_and_queue/queue.assets/linkedlist_queue_step3_pop.png
similarity index 100%
rename from docs/chapter_stack_and_queue/queue.assets/linkedlist_queue_pop.png
rename to docs/chapter_stack_and_queue/queue.assets/linkedlist_queue_step3_pop.png
diff --git a/docs/chapter_stack_and_queue/queue.md b/docs/chapter_stack_and_queue/queue.md
index e0a32e70..db061580 100755
--- a/docs/chapter_stack_and_queue/queue.md
+++ b/docs/chapter_stack_and_queue/queue.md
@@ -321,13 +321,13 @@
如下图所示，我们可以将链表的“头节点”和“尾节点”分别视为“队首”和“队尾”，规定队尾仅可添加节点，队首仅可删除节点。
=== "LinkedListQueue"
- 
+ 
=== "push()"
- 
+ 
=== "pop()"
- 
+ 
以下是用链表实现队列的代码：
@@ -349,13 +349,13 @@
可以看到，入队和出队操作都只需进行一次操作，时间复杂度均为 $O(1)$ 。
=== "ArrayQueue"
- 
+ 
=== "push()"
- 
+ 
=== "pop()"
- 
+ 
你可能会发现一个问题：在不断进行入队和出队的过程中，`front` 和 `rear` 都在向右移动，**当它们到达数组尾部时就无法继续移动了**。为了解决此问题，我们可以将数组视为首尾相接的“环形数组”。
diff --git a/docs/chapter_stack_and_queue/stack.assets/array_stack.png b/docs/chapter_stack_and_queue/stack.assets/array_stack_step1.png
similarity index 100%
rename from docs/chapter_stack_and_queue/stack.assets/array_stack.png
rename to docs/chapter_stack_and_queue/stack.assets/array_stack_step1.png
diff --git a/docs/chapter_stack_and_queue/stack.assets/array_stack_push.png b/docs/chapter_stack_and_queue/stack.assets/array_stack_step2_push.png
similarity index 100%
rename from docs/chapter_stack_and_queue/stack.assets/array_stack_push.png
rename to docs/chapter_stack_and_queue/stack.assets/array_stack_step2_push.png
diff --git a/docs/chapter_stack_and_queue/stack.assets/array_stack_pop.png b/docs/chapter_stack_and_queue/stack.assets/array_stack_step3_pop.png
similarity index 100%
rename from docs/chapter_stack_and_queue/stack.assets/array_stack_pop.png
rename to docs/chapter_stack_and_queue/stack.assets/array_stack_step3_pop.png
diff --git a/docs/chapter_stack_and_queue/stack.assets/linkedlist_stack.png b/docs/chapter_stack_and_queue/stack.assets/linkedlist_stack_step1.png
similarity index 100%
rename from docs/chapter_stack_and_queue/stack.assets/linkedlist_stack.png
rename to docs/chapter_stack_and_queue/stack.assets/linkedlist_stack_step1.png
diff --git a/docs/chapter_stack_and_queue/stack.assets/linkedlist_stack_push.png b/docs/chapter_stack_and_queue/stack.assets/linkedlist_stack_step2_push.png
similarity index 100%
rename from docs/chapter_stack_and_queue/stack.assets/linkedlist_stack_push.png
rename to docs/chapter_stack_and_queue/stack.assets/linkedlist_stack_step2_push.png
diff --git a/docs/chapter_stack_and_queue/stack.assets/linkedlist_stack_pop.png b/docs/chapter_stack_and_queue/stack.assets/linkedlist_stack_step3_pop.png
similarity index 100%
rename from docs/chapter_stack_and_queue/stack.assets/linkedlist_stack_pop.png
rename to docs/chapter_stack_and_queue/stack.assets/linkedlist_stack_step3_pop.png
diff --git a/docs/chapter_stack_and_queue/stack.md b/docs/chapter_stack_and_queue/stack.md
index 17c2728c..a8fe86b9 100755
--- a/docs/chapter_stack_and_queue/stack.md
+++ b/docs/chapter_stack_and_queue/stack.md
@@ -319,13 +319,13 @@
如下图所示，对于入栈操作，我们只需将元素插入链表头部，这种节点插入方法被称为“头插法”。而对于出栈操作，只需将头节点从链表中删除即可。
=== "LinkedListStack"
- 
+ 
=== "push()"
- 
+ 
=== "pop()"
- 
+ 
以下是基于链表实现栈的示例代码：
@@ -338,13 +338,13 @@
使用数组实现栈时，我们可以将数组的尾部作为栈顶。如下图所示，入栈与出栈操作分别对应在数组尾部添加元素与删除元素，时间复杂度都为 $O(1)$ 。
=== "ArrayStack"
- 
+ 
=== "push()"
- 
+ 
=== "pop()"
- 
+ 
由于入栈的元素可能会源源不断地增加，因此我们可以使用动态数组，这样就无须自行处理数组扩容问题。以下为示例代码：
diff --git a/docs/index.assets/hello_algo_hero.jpg b/docs/index.assets/hello_algo_hero.jpg
deleted file mode 100644
index c416fdf2..00000000
Binary files a/docs/index.assets/hello_algo_hero.jpg and /dev/null differ
diff --git a/docs/index.md b/docs/index.md
index f008d366..a347ea86 100644
--- a/docs/index.md
+++ b/docs/index.md
@@ -148,7 +148,7 @@ hide:
- 500 幅动画图解、12 种编程语言代码、2000 条社区问答，助你快速入门数据结构与算法
+ 500 幅动画图解、12 种编程语言代码、3000 条社区问答，助你快速入门数据结构与算法
diff --git a/mkdocs-en.yml b/mkdocs-en.yml
index 87846ef5..903a3841 100644
--- a/mkdocs-en.yml
+++ b/mkdocs-en.yml
@@ -17,6 +17,19 @@ theme:
font:
text: Roboto
code: Roboto Mono
+ palette:
+ - scheme: default
+ primary: white
+ accent: teal
+ toggle:
+ icon: material/theme-light-dark
+ name: Dark mode
+ - scheme: slate
+ primary: black
+ accent: teal
+ toggle:
+ icon: material/theme-light-dark
+ name: Light mode
extra:
status:
diff --git a/mkdocs.yml b/mkdocs.yml
index e85a7cd1..8d1a32d8 100644
--- a/mkdocs.yml
+++ b/mkdocs.yml
@@ -46,16 +46,16 @@ theme:
palette:
- scheme: default
primary: white
- # accent: indigo
+ accent: teal
toggle:
icon: material/theme-light-dark
- name: Switch to dark mode
+ name: 深色模式
- scheme: slate
- primary: grey
- # accent: indigo
+ primary: black
+ accent: teal
toggle:
icon: material/theme-light-dark
- name: Switch to light mode
+ name: 浅色模式
font:
text: Noto Sans SC
code: Fira Code
diff --git a/docs/assets/images/favicon.png b/overrides/assets/images/favicon.png
similarity index 100%
rename from docs/assets/images/favicon.png
rename to overrides/assets/images/favicon.png
diff --git a/docs/assets/images/logo.png b/overrides/assets/images/logo.png
similarity index 100%
rename from docs/assets/images/logo.png
rename to overrides/assets/images/logo.png
diff --git a/docs/assets/images/logo.svg b/overrides/assets/images/logo.svg
similarity index 100%
rename from docs/assets/images/logo.svg
rename to overrides/assets/images/logo.svg
diff --git a/overrides/stylesheets/extra.css b/overrides/stylesheets/extra.css
index 262c148d..358a6a3e 100644
--- a/overrides/stylesheets/extra.css
+++ b/overrides/stylesheets/extra.css
@@ -8,6 +8,9 @@
--md-default-fg-color: #1d1d20;
--md-default-bg-color: #ffffff;
+ --md-body-bg-color: #22272e;
+ --md-header-bg-color: rgba(255, 255, 255, 0.6);
+
--md-code-fg-color: #1d1d20;
--md-code-bg-color: #f5f5f5;
@@ -32,6 +35,9 @@
--md-default-fg-color: #adbac7;
--md-default-bg-color: #22272e;
+ --md-body-bg-color: #22272e;
+ --md-header-bg-color: rgba(34, 39, 46, 0.8);
+
--md-code-fg-color: #adbac7;
--md-code-bg-color: #1d2126;
@@ -42,7 +48,7 @@
--md-footer-fg-color: #adbac7;
--md-typeset-color: #adbac7;
- --md-typeset-a-color: #52bbb1 !important;
+ --md-typeset-a-color: #52bbb1;
--md-typeset-btn-color: #52bbb1;
--md-typeset-btn-hover-color: #55aea6;
@@ -50,6 +56,23 @@
--md-admonition-pythontutor-color: #30363f;
}
+[data-md-color-scheme="slate"][data-md-color-primary="black"],
+[data-md-color-scheme="slate"][data-md-color-primary="white"] {
+ --md-typeset-a-color: #52bbb1;
+}
+
+[data-md-color-primary="black"] .md-header {
+ background-color: var(--md-header-bg-color);
+}
+
+.md-header {
+ box-shadow: none;
+ transition: none;
+ backdrop-filter: saturate(180%) blur(20px); /* Gaussian blur */
+ -webkit-backdrop-filter: saturate(180%) blur(20px); /* Safari */
+ background-color: var(--md-header-bg-color);
+}
+
/* https://github.com/squidfunk/mkdocs-material/issues/4832#issuecomment-1374891676 */
.md-nav__link[for] {
color: var(--md-default-fg-color) !important;
@@ -400,7 +423,7 @@ a:hover .hero-caption {
display: flex;
flex-wrap: wrap;
justify-content: center;
- max-width: 720px;
+ max-width: 40em;
margin: 1em auto;
}
@@ -433,6 +456,17 @@ a:hover .hero-caption {
height: 33vw;
}
+ .contrib-image {
+ width: 100%;
+ }
+}
+
+/* Hide table of contents */
+@media screen and (max-width: 60em) {
+ .home-div {
+ font-size: 0.75rem;
+ }
+
.intro-container {
flex-direction: column;
}
@@ -454,25 +488,14 @@ a:hover .hero-caption {
margin-bottom: 1em;
}
- .contrib-image {
- width: 100%;
+ .text-button {
+ margin: 0.7em auto;
}
.profile-div {
- max-width: 500px;
+ max-width: 30em;
}
.profile-cell {
flex-basis: 25%;
}
}
-
-/* Hide table of contents */
-@media screen and (max-width: 60em) {
- .home-div {
- font-size: 0.75rem;
- }
-
- .text-button {
- margin: 0.7em auto;
- }
-}